Day 4: Tuesday, Oct.25 – Eureka to Shingletown via Redding

So, from Eureka, I went to Redding, CA. Leaving Eureka, I went for the 299, which is in many way very similar to the 199, with a lot of twisties, and nice views on the small river flowing by the side. Several road works too. At some point stopped at a Renner gas station, which only […]

Day 3: Monday, Oct. 24 – Visiting Eureka.

Day 3: Monday, Oct. 24 So, after the previous night had been quite windy, and then it started pouring rain in the morning, I decided that traveling with heavy rain would not be the best idea, so I extended my stay in Eureka’s KOA and spent the time transfering stuff between the cams and the […]

Days 1 and 2: Saturday & Sunday, Oct. 22-23 – Vancouver to Eureka, CA via Albany, OR

OK. Let’s do a quick one. It’s 2:10am in Arcata/CA, but I got waken up by the wind blowing on the tent, wondering if I should put some clothes on and tie the tent down with the 2 extra strings that came with it… Day 1 – Saturday, Oct.22 So, left Vancouver, BC, Canada on […]

Packed

Just finished “packing the bike”. Ready to roll in the morning…

Little delay and slight changes

So, I was supposed to start the US trip today, but some unrelated paperwork that needed to be ready was delayed a bit and I’ll probably leave tomorrow, Friday, instead. Not a big deal anyway, it just gives me a bit more time checking I thought about everything, and also to see how the bike is handling […]

I Mounted My New Tires Yesterday!

So, today was pretty busy, and my hands suffered a lot from mounting my new Continental TKC-80 tires (bought from fortnine.ca), and I spent most of the afternoon on it. In the morning, I went to Canadian Tire, initially to buy a 18mm hex bit that I needed (according to the service manual) to remove my […]

Heated Grips And Handguards Mounted

Spent a big part of the late morning and afternoon yesterday installing the latest gear I received from Twisted Throttle Canada. Unfortunately the folding shift lever they sent me was the wrong reference and was for a V-Strom 1000. I didn’t pay attention to the little sticker on the box at that time, and assembled […]

Trip planning: more details + a few more accessories for Asteria

Furkot So, yesterday – or was it the day before yesterday? – I was referred to Furkot, a site to help planning trips, and I discover that what I had done in google maps (at google.com/mymaps) could be done far more easily at Furkot. Below is an embedded map of the whole trip, using Furkot: Anyway, I’m still […]

US Trip Planning: Something Concrete At Last!

So, I finally put a path on the USA map for my coming trip, due to start by mid-october. You can find that draft here, but don’t forget this is more a rough forecast than a precise timeline. I will most certainly take more time than the “days” shown, since I may easily stay longer at […]

MEC shopping, US National Parks pass, more bike gear shopping and more wiring

So many news since last update. Let’s go chronologically. US National Parks Annual Pass So, since I’m planning to travel around a big part of the USA, I thought it would make sense to get a hold of a national park pass as I may cross and visit a few ones during this first short […]

© Copyright Riding Around The World (R-ATW), 2016-2018 Frontier Theme